Alvins Cables 8K 2.1 Mini HDMI to HDMI Coiled Cable (Nikon D3200/D810/Z6II/Z7II)
Product Description
The Alvin's Cables 8K Mini-HDMI to HDMI Coiled Cable is a coiled lead for photographers and videographers whose camera, such as a Nikon D810, Z6 II, or Z7 II, has a mini-HDMI port and needs a tidy link to a monitor, TV, or projector.
The cable has a supple TPE jacket that resists knotting and oil, and the coil pulls out to reach then draws back so slack gathers up rather than trailing. The mini-HDMI plug goes to the camera and the full-size plug to the display, and both reinforced aluminium alloy shells hold gold-plated contacts that seat firmly into their ports.
Ideal for: Photographers and videographers using cameras with a mini-HDMI output, such as many Nikon and Canon DSLRs, connecting to an HDTV, monitor, or projector. It also carries signal both ways for laptops, tablets, and graphics cards with a mini-HDMI port.
Mini-HDMI ports are small and easily strained, and a loose, stiff cable both clutters the setup and tugs at that fragile socket every time the camera moves. This cable answers that with a coil that keeps slack gathered up and heavy shielding that holds the signal clean, while the aluminium shells and gold contacts stand up to repeated use. The result is a tidy, stable connection that eases the load on a small camera port.
Key Features
- Mini-HDMI coiled bi-directional design: The coil retracts to about 35 cm and stretches to roughly 50 cm, and signal passes both ways, so it stays tidy on a mini-HDMI camera while also serving a laptop or tablet feeding a display.
- HDMI 2.1 up to 8K60 and 4K240: The cable supports 8K at 60 Hz and 4K at up to 240 Hz, so high-resolution stills review and high-frame-rate footage pass through cleanly, with backward compatibility for HDMI 2.0 and 1.4 gear.
- Quadruple shielding: A tinned-copper winding shield, aluminium foil, mylar, and tinned-copper braid together guard against EMI and RFI, so the picture stays free of black screens, frame loss, and flicker.
- Durable TPE and aluminium build: The pull, wear, and oil-resistant TPE jacket pairs with reinforced aluminium alloy shells and gold-plated contacts, so the cable resists knotting and the plugs hold their connection over time.
Specifications
| Specification | Detail |
|---|---|
| Interface | HDMI 2.1, backward compatible with HDMI 2.0 and 1.4, so it also runs with older displays and gear |
| Connectors | Mini-HDMI male to full-size HDMI male, matching the mini output found on many Nikon and Canon cameras |
| Direction | Bi-directional, carrying signal from mini-HDMI to HDMI or the reverse |
| Cable length | 35 cm unstretched, extending to 50 cm coiled (13.8" to 19.7"), so it stays short but reaches a nearby display |
| Maximum resolution | 8K at 60 Hz, with support for 4K at 240 Hz, 4K at 144 Hz, and 1080p at 240 Hz |
| Type | Passive cable, no external power required, plug in and go |
| Jacket | Thermoplastic elastomer (TPE), resistant to pulling, wear, and oil, and slow to knot |
| Shielding | Quadruple: tinned-copper winding shield, aluminium foil, mylar, and tinned-copper braid |
| Connector housing | Reinforced aluminium alloy with gold-plated contacts |
What's Included
- Alvin's Cables 8K Mini-HDMI to HDMI Coiled Cable (35 cm unstretched, 50 cm stretched)
