Alvins Cables 8K 2.1 Full HDMI Cable 12-18in Braided Coiled Red / Straight-Straight
Product Description
The Alvin's Cables 8K 2.1 Braided Coiled HDMI Cable is a short, coiled HDMI 2.1 lead for camera operators, studio photographers, and content creators who need to feed a monitor or recorder on a rig and keep an 8K60 or 4K120 signal stable in a tight space.
Finished in a deep red braided jacket, the cable has a springy coil that pulls out to length and draws back on itself when you release it, so slack gathers up instead of dangling across your rig. The gold-plated connector heads seat into an HDMI port with a firm, positive fit, and the woven sleeve gives the whole cable a taut, hard-wearing feel in the hand.
Ideal for: On-set camera operators working on rigs and gimbals, studio photographers running tethered monitors, and content creators connecting a camera to an external monitor or recorder.
On a loaded rig, a full-length HDMI lead tends to sag, catch on arms and clamps, and tug at the port every time you reposition the camera. This cable answers that with a coiled body that stays short between the camera and a nearby monitor, while the shielding and conductor build keep the high-bandwidth video signal clean where a thinner cable might drop out. The result is a tidy connection between two close-mounted devices that holds its picture during a shoot.
Key Features
- Coiled braided design: The cable retracts to about 30.5 cm and stretches to roughly 45.7 cm, so it spans the short gap between a camera and a rig-mounted monitor without loose cable snagging on clamps or catching on your hands as you pan.
- HDMI 2.1 at up to 48 Gb/s: The full 48 Gb/s of bandwidth carries 8K60 and 4K120 footage, which means high-frame-rate and high-resolution monitoring passes through without the cable becoming the bottleneck in your signal chain.
- Triple-layer shielding: Three layers of shielding wrap the core to hold off interference from nearby wireless units, motors, and power cables, so your monitor feed stays free of flicker and dropouts on a busy set.
- Gold-plated connectors: The gold-plated contacts resist corrosion and keep a steady, low-resistance link over repeated plugging and unplugging, so the connection stays reliable across many shoots.
Specifications
| Specification | Detail |
|---|---|
| Interface | HDMI 2.1, backward compatible with HDMI 2.0, 1.4, and 1.3, so it also runs with older monitors and recorders you may already own |
| Connectors | HDMI male to HDMI male, a standard full-size fit for most on-camera monitors and field recorders |
| Cable length | 30.5 to 45.7 cm coiled (12 to 18"), short enough to keep a camera-to-monitor run tidy on a rig |
| Maximum resolution | 7680 x 4320 at 60 Hz (8K60), with headroom for 4K at 120 Hz monitoring |
| Transmission speed | Up to 48 Gb/s, the full HDMI 2.1 bandwidth for uncompressed high-resolution video |
| Type | Passive cable, no external power required, plug in and go |
| Ethernet channel | Yes, carries the HDMI Ethernet channel for compatible devices |
| Conductor | Tinned copper, which resists oxidation and helps maintain a clean signal over the cable's life |
| Connector plating | Gold-plated contacts for corrosion resistance and a stable connection |
| Shielding | Triple-layer, to reduce electromagnetic interference on set |
| Jacket | Braided sleeve for abrasion resistance and a firm, coiled body |
| Colour | Red |
What's Included
- Alvin's Cables 8K 2.1 Braided Coiled HDMI Cable (Red, 30.5 to 45.7 cm coiled)
